Bal klep

1pc Threaded Ball klep

1) Castings Investasi pikeun Awak na Cap

2) Hiji sapotong design, floating bal klep, ngurangan bore

3) Peunteun tekanan; 1000PSI, PN63

4) Ahir Thread: ANSI B2.1, BS21, ISO7/1

5) hawa gawé: ti -25 C nepi ka 180 C

6) Materail: stainless steel CF8M, CF8, 1.4408,1.4403, WCB, CF3M

7) Sedeng aliran: Cai, Minyak jeung Gas

8) Ukuran tina 1/4 ″ nepi ka 2 ″ Cai, Cai Laut, asam anorganik sareng Cairan alkali jsb.

Tempo deui produk>
1pc Flanged Ball klep

1.Investasi Casting pikeun Awak na Cap

2.Internal Éntri Blow-Out Proot Batang

3.Peunteun Tekanan: 1/2"-2":PN16/25/40;2-1/2"-4":PN16

4. Ukuran: DN6-DN50 (1/4"-2")

5.Flanged Tungtung: 1/2"-2"(PN16/25/40):DIN2543/2544/2545;2-1/2"-4"(PN16):DIN2543

6. Pamasangan Pad: ISO 5211

7.Working Suhu: -25 ° C + 180 ° C

8.Bahan: CF8, CF8M, CF3M, WCB

9. Inspection Tés: API 598, EN12266

Tempo deui produk>
2pcs Thread Ball klep

1.Investasi castings pikeun Awak na Cap

2.Internal Éntri Blow-Out Buktina Batang

3. Peunteun Tekanan: 1000PSI (PN63)

4. Thread Tungtung: ANSI B2.1, BS21, ISO7 / 1

5.Working tekanan: -25 ℃ + 180 ℃

6. Bahan: CF8M, CF8, CF3M, WCB

7. Konci Alat (pilihan)

Tempo deui produk>
2pcs Flanged Ball klep

1.Investasi castings pikeun Awak na Cap

2. Batang Bukti Blow-Out Éntri Internal 3. Peunteun Tekanan: PN16 PN25 PN40

4.Thread Tungtung: DIN3202 F4

5.Working tekanan: -25 ℃ + 180 ℃

6. Bahan: CF8M, CF8, CF3M, WCB

7. Konci alat (opsional)

Tempo deui produk>
3pcs Thread Ball klep

1. Investasi Casting pikeun Awak Jeung Cap

2. Éntri internal Blow- Out Buktina Batang

3. Peunteun tekanan: 1000PSI (PN63)

4. Treaded Ends: ANSI B2.1, BS 21, DIN 259/2999

5. Bahan: CF8M, CF8, CF3M, WCB

6. Uji Tekanan: API 598

Tempo deui produk>
Beusi Flanged Ball klep

1. tekanan gawé: 1.0Mpa / 1.6Mpa

2. Suhu gawé: -20 ℃ ~ + 120 ℃

3. Pahareup-hareup nurutkeun

1"-4": DIN3202 F4

5"-8": DIN3202 F5

4. Flange nurutkeun EN1092-2, jsb.

5. Tés: DIN3230, API598

6. Sedeng: Cai, Minyak, Gas jsb.

Tempo deui produk>